The electrically deployable tow bar is stowed discreetly behind the rear bumper when not in use, providing a clean attractive finish. It is designed to deploy/stow in 12 seconds and is operated via a switch in the rear loadspace or by the infotainment system in the cabin. Returns to original position if any obstructions encountered during deploying/stowing. Includes integral 13 pin towing electrics (also hidden until deployed). Approved for up to 3,500kg trailer load. Includes a unique trailer light test facility which allows the driver to check without assistance if the trailer lights, including reverse and brake lights, are functioning correctly. The trailer light test is activated via either a switch in the loadspace or via the touchscreen, depending on the vehicle’s specification. Not applicable for PHEV. Includes EDT hardware, fixings and EDT 13 pin towing electrics. Requires tow eye cover VPLGB0154 for fitment. Pre 17MY also requires EDT ECU and harness kit VPLGT0152, EDT switch kit VPLWT0123 for fitment. 17MY only requires ECU VPLGT0204, EDT harness VPLGT0202 and EDT switch kit VPLGT0206 for fitment. 18MY onwards requires ECU VPLGT0204, EDT switch kit VPLWT0243 and EDT harness VPLGT0225 for fitment. Trailer light test feature is applicable to 17MY onwards vehicles only. Not suitable for caravans, trailers or lighting boards fitted with rear mounted LED lamp kits. A target tracking sticker is required for vehicles fitted with trailer assist option.